Spray Foam Insulation Montrose County, CO

At Pure Green Insulation, we take pride in serving both residential homeowners as well as business owners with top quality service in spray foam insulation in and around the following areas:

• Montrose
• Naturita
• Nucla
• Olathe

​
Before opting for spray foam insulation in Montrose County, CO, it is important to know what it is, how to prepare your home before you hire spray foam insulation professionals and whether you should opt for a DIY project or not.

What Is Spray Foam Insulation?

Spray foam insulation has been used as an insulation material since the late 1970’s. It was first invented in 1937 by Otto Bayer and has been used in many applications including furniture, packaging and building insulation since then. Spray foam is a chemical compound that consists of two parts- polyol resin and isocyanate. When these chemicals are mixed together, they form spray foam insulation. Depending on whether it is open cell or closed cell spray foam, it expands 30 to 60 times its volume.

​How to prepare your Home before Spray Foam Insulation is Installed?

It is always better to prepare your home before spray foam insulation contractors in Montrose, CO begin the project in your home. Some of the tips that you could keep in mind are as follows:

• Move things out of the way – When contractors in Naturita, CO use spray foam insulation, they often have to move furniture and other things out of the way. Spray foam insulation is very sticky and easily sticks on most substrates. So, before you hire your spray foam insulation contractors in Montrose, CO, and before they start their job, make sure that you clear the area well. For instance, you can move storage boxes and other items out of the attic or basement. If you need spray foam insulation in your pole barn or garage, you would definitely need to clear up that space too before the insulation can be installed.
• Cover things that can’t be moved – Sometimes you may have very heavy furniture or fixtures that can’t be moved. In this case make sure to cover it up to prevent any spray foam from sticking to it. A good option is to use plastic sheets and tape.
• Removing the old insulation- Spray foam insulation cannot be sprayed over old insulation. If you are opting for spray foam insulation in Nucla, CO, but already have cellulose or fiberglass insulation installed, that will need to be removed first. Most good professionals dealing with spray foam insulation installation in Montrose County, CO will remove it for you but sometimes your contractor might ask you to have it removed before they work on your spray foam project. 

DIY Spray Foam Insulation in Montrose, CO

DIY spray foam insulation in Montrose, CO seems like a good option and an alternative to the high costs of paying contractors to install it. But before you opt for DIY spray foam insulation you should weigh the pros and cons.

Some of the pros of DIY spray foam insulation are:

• Cutting on costs- Since spray foam insulation in Olathe, CO can be costly, DIY spray foam insulation will help you cut down on costs.
• Easily available- With the increasing popularity of spray foam insulation in Montrose County, CO, you can easily find spray foam insulation kits in your local hardware stores.
• Less waiting time- Spray foam insulation contractors can have a busy schedule and you may need to book them in advance. But with a DIY spray foam insulation kit, you don’t need to wait at all.
• Ideal for tiny spaces- DIY spray foam insulation makes a great project for working in small spaces like inside your closet for example.

The cons of DIY spray foam insulation are as follows:

• Fire potential- Spray foam insulation in Montrose, CO is best done by professionals. This is because the vapors that are given off from the chemicals are flammable. Spray foam insulation contractors in Nucla, CO take precautions and make sure that there are no open flames or any potential ignition sources anywhere near the area where spray foam insulation will be installed.
• Protective gear- Professional spray foam insulation contractors need to use specialized protective gear while using spray foam insulation in Montrose, CO. This includes gloves, a full body-suit, and a face mask. You may not have all this equipment at home and it seems pointless to purchase it just for a one-time job.
• Too much foam- It is true that you need to spray a certain thickness of spray foam in order to reach the essential R-value. But with a DIY job, you may end up spraying too much of the product which will only be a waste of resources.
• Too sticky or too wet- Spray foam insulation in Olathe, CO also needs to be prepared according to the correct consistency. It could end up becoming too sticky or too wet and be useless in both cases. You will not be able to apply it to the substrate properly and this could lead to more of a mess than a successful project

Is Spray Foam Insulation Eco-friendly?

These days renovating and upgrading our home or business space is as important in keeping up with eco-friendliness. Before installing any spray foam product in Montrose County, CO, always speak to your insulation contractor about the product that they will be installing. Find out about the GWP (Global Warming Potential) of the product.
​
The EPA defines GWP as “the measure of how much energy the emissions of 1 ton of a gas will absorb over a given period of time, relative to the emissions of 1 ton of carbon dioxide.” The GWP of a spray foam product depends on the blowing agent used. Nowadays, there are many spray foam products that have blowing agents which is less than 1 and these are the least harmful to the environment.

Contact Us

If you want to insulate your home with spray foam insulation in Montrose County, CO, contact us today. We have a team of experts who are professionally trained and have plenty of experience in the field. We could offer you a free estimate and assessment if you like.

Call (720) 336-2338